Your problem is that your modem is not recognized - i.e. nothing responds @ttyS0. Have you tried with minicom? Send an "AT" command and see if anything comes back?
On Feb 26, 1:05 pm, fiorenzino <[email protected]> wrote: > Hi, > > i want use smslib with my modem: DIGICOM POCKET GPRS TM > > http://www.digicom.it/digisit/prodotti.nsf/ITProdottiIDX/PocketGprsTm... > > This is my test execution log: > > Found port: /dev/ttyS0 > Trying at 9600... no device found > Trying at 14400... no device found (Baud rate not supported) > Trying at 19200... no device found (Not all params are > supported by kernel) > Trying at 28800... no device found (Baud rate not supported) > Trying at 33600... no device found (Baud rate not supported) > Trying at 38400... no device found (Not all params are > supported by kernel) > Trying at 56000... no device found (Baud rate not supported) > Trying at 57600... no device found (Not all params are > supported by kernel) > Trying at 115200... no device found (Not all params are > supported by kernel) > > Some help to customize ATHandler like ATHandler_Huawei_E160.java, > ATHandler_MultiTech.java > ATHandler_Siemens_HC25.java, ATHandler_SonyEricsson.java.... > > Thanks in advance > > Fiorenzo -- You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
