Hi, Try to switch to the TEXT protocol (with <gatewayObject>.setProtocol()). Call this method after starting the service and before attempting to send any messages.
On Mar 1, 11:44 pm, fiorenzino <[email protected]> wrote: > Hi, > > i resolved my problems without smslib, but i want use your libraries. > > Some tricks: > > 1) my modem don't support FlowControlMode settings, the error is > UnsupportedCommOperationException > 2) my parameters: > portName="/dev/ttyS0", > baudRate=19200, > databits=8, > stopbits=1, > parity=0 > 3) my AT sequence: > > cmd = "AT"; > cmd = "AT+CSQ"; > cmd = "AT+CSCA=\"" + csca + "\""; > cmd = "AT+CMGF=1"; > cmd = "AT+CMGS=\"" + recipient + "\""; > cmd = message; > cmd = cntrlZ; > > Is possibile use smslib, using this hackings? > > Fiorenzo > > On 27 Feb, 23:50, Thanasis <[email protected]> wrote: > > > > > Your problem is that your modem is not recognized - i.e. nothing > > responds @ttyS0. > > Have you tried with minicom? Send an "AT" command and see if anything > > comes back? > > > On Feb 26, 1:05 pm, fiorenzino <[email protected]> wrote: > > > > Hi, > > > > i want use smslib with my modem: DIGICOM POCKET GPRS TM > > > >http://www.digicom.it/digisit/prodotti.nsf/ITProdottiIDX/PocketGprsTm... > > > > This is my test execution log: > > > > Found port: /dev/ttyS0 > > > Trying at 9600... no device found > > > Trying at 14400... no device found (Baud rate not supported) > > > Trying at 19200... no device found (Not all params are > > > supported by kernel) > > > Trying at 28800... no device found (Baud rate not supported) > > > Trying at 33600... no device found (Baud rate not supported) > > > Trying at 38400... no device found (Not all params are > > > supported by kernel) > > > Trying at 56000... no device found (Baud rate not supported) > > > Trying at 57600... no device found (Not all params are > > > supported by kernel) > > > Trying at 115200... no device found (Not all params are > > > supported by kernel) > > > > Some help to customize ATHandler like ATHandler_Huawei_E160.java, > > > ATHandler_MultiTech.java > > > ATHandler_Siemens_HC25.java, ATHandler_SonyEricsson.java.... > > > > Thanks in advance > > > > Fiorenzo -- You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
