Pete,
Yes the file is changing every few seconds or sooner. Sorry, I just
did a 'grab' of it and posted. The 307 is due to me stopping it after 30 min
or so and altering the few changes to the .conf file. I will continue to
monitor it over the weekend. However, so far so good. Thanks again for taking
the time to help out.
Keith
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Pete McNeil
Sent: Fri 4/1/2005 10:18 PM
To: Keith Johnson
Cc:
Subject: Re[8]: [sniffer] Persistent Sniffer
On Friday, April 1, 2005, 9:36:05 PM, Keith wrote:
KJ> Pete/Matt/Andrew,
KJ> Thanks for all your wonderful input. Maybe I didn't
KJ> give it a fair shake or time enough as mentioned by Pete earlier.
KJ> I turned it on again about 30 min ago and have seen my system
KJ> stable, currently it is:
KJ> TicToc: 1112391330
KJ> Loop: 264
KJ> Poll: 445
KJ> Jobs: 290
KJ> Secs: 307
KJ> Msg/Min: 56.6775
KJ> Current-Load: 21.4724
KJ> Average-Load: 22.4706
KJ> These numbers were up around 120 Msg/Min and Current
KJ> Load at 90+ CPU is aver. about 17% right now. However, could
KJ> be skewed a bit since it is Friday night. I will continue to
KJ> watch it over the weekend and see how it goes. Still considering
KJ> running Win DNS local or BIND 9.3 for NT/2000/2003. Have a great
KJ> weekend.
Hrmmm.... Something here doesn't add up. Is the .stat file changing
every second or so? If not then the persistent engine has stopped. In
fact, 307 seconds is scarcely 5 minutes - not 30. It appears that at
the time you sampled the file your system was happily humming along at
about 1 msg/sec... which is a lul for you. Remember that your average
would be about 1.7 messages per second. I also note that the load and
poll time indicated a good deal of "dead air" so the system was
definitely not working hard at the time.
Take a look at it again and make sure that the .stat file changes
every 1-4 seconds or so. If not then the persistent server has stopped
- at least the client instances will see it that way.
Hope this helps,
_M
This E-Mail came from the Message Sniffer mailing list. For information
and (un)subscription instructions go to
http://www.sortmonster.com/MessageSniffer/Help/Help.html
<<winmail.dat>>
