Mike, I have been making fiberglass parts for about 15 years and still the
best way is to paint after the part is made. Tinting the epoxy gives a
semi-opaque finish and sometimes weakens the epoxy. If painting the mold
prior to lay-up, the mold needs to be perfect. Any imperfection on the mold
line would need touch-up and re-work making that a waste of time. I use
quality primers and automotive paint to get excellent paint jobs... While
I am at it, I hate to see the new trend of high-dollar sailplane kits that
have mold lines down the length of the fuselage. I think some of the
American manufacturers should take a lesson from the European kit makers who
produce seamless lap-joints on their fuselages.
----- Original Message -----
From: Mikey D <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 28, 1999 4:34 PM
Subject: [RCSE] Molding Fiberglass with color??
> Hello Everyone,
> I'm interested in polling the group on which way to color a fuselage
layup.
> The way I see it there are 3 ways to get color onto a fuselage.
> 1. Use a pigmant when mixing up your epoxy??
> 2. Paint the mold prior to laying up the glass??
> 3. Paint the fuse after poping out the fuse from the mold??
> Looking for Pro's, Con's tips and tricks anything the experts can add..
>
> Thanks,
> Mikey D
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]