Well you don't seem bothered by a very sensitive plane. So it seems like maybe your incidence measurements might be inaccurate. The dive test is a poor test of proper CG as the wing builds up speed it creates more lift. You didn't tuck either which indicates you have more to go...
Flying inverted is helpful.
All together sensitivity, dive, and inverted flight are better. Also dead air time is a good indicator. Brian Agnew wrote (in RC Soaring) about testing CG years ago by going out at 6am and flying ... pulling out nose weight until the flight suffered. This is still subjective as we all don't fly the same each time.



Mark Miller wrote:

Just a general question that has nothing to do with 2 meter planes but sailplanes in 
general.  I had a first flight of a sailplane awhile back. I did the dive test and 
flew inverted. Felt nose heavy. Took out lead. Did it again...took out lead...did it 
a few more times. All the while putting in down trim to keep it flying level. I get 
to the point where I notice that the decilage (sp) is massively wrong. LOTS of down 
stab to keep the plane flying level. Like 1/4" from zero. Take note that in a 
dive test it is still pulling up to much. So, the question is should I keep moving 
the CG back and keep making the decilage further off or do I put the CG so that I 
have zero or very little decilage angle. BTW...It has a full flying stab. I would 
think having so much decilage would cause a lot of drag....Opinions?

Mark Miller


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe 
messages must be sent in text only format with MIME turned off.  Email sent from web based email 
such as Hotmail and AOL are generally NOT in text format




--
Jeff Steifel

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe 
messages must be sent in text only format with MIME turned off.  Email sent from web based email 
such as Hotmail and AOL are generally NOT in text format

Reply via email to