You also need to set the flapern mix. Its just above the flap rate. Set the values to +100 and you should see them work. -------------- Original message ---------------------- From: "Chris Rose" <[EMAIL PROTECTED]> > I just got a 9303 for an incredible price, and have run into a wall > trying to convert all my gliders over to it. I've followed this post > as a guide from rcgroups: > > > http://www.rcgroups.com/forums/showthread.php?t=347609 > > My problem is that I try adjusting the flaps in the flap rates and > camber mix menus, but I don't see any change in the flaps as I move > the various switches for the various flight modes. I'm trying to > program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something > that I'm missing? I've tried to program this like I would my JR 6102, > but this is an entirely different beast. > > FYI, I'm trying to program three DLGs, and a 3M Trio, as well as a > couple of 2Ms. > > Thanks for the help, > > Chris Rose > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with MIME > turned off. Email sent from web based email such as Hotmail and AOL are > generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
