good cells for rx/tx. One of the issues with using lipos in these situations is that if you leave the device on, the cells will drain and die. Eneloops don't have this issue. So eneloops for tx/rx. The one disadvantage, if you are used to lipo's light weight, eneloops will affect the balance. (including in my tx which is MUCH heavier with the eneloops)
On Sun, May 11, 2008 at 10:22 AM, Bill's Email <[EMAIL PROTECTED]> wrote: > I'm using them in a 3-channel transmitter. They run it (Futaba PM) for 14 > hours and hold their charge on the shelf like a lipo. The internal > impedance is 25 milliohms. So not great, about the same as the Santo 2700 AA > cells. > > Here's their website: http://www.eneloopusa.com/ > > Cell Specs: http://www.eneloopusa.com/pdf/HR-3UTG_Spec-eneloop.pdf > > Neat cells. Treat like a NiMH and they act like a Lipo (with respect to > holding the charge on the shelf). > > Bill > > > Robert P Buxton wrote: > >> Has anyone on the exchange had any first hand experience with these >> batteries. I acquired 4 from a friend and made up a flight pack. Cycled them >> twice and they were right on the money at 2000mA. My concern is that I will >> be running 6 JR digital servos on this battery, therefore does anyone know >> the internal impedance for these batteries? All comments welcome >> > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with > MIME turned off. Email sent from web based email such as Hotmail and AOL > are generally NOT in text format >
