Or trim the elevator via the sub trim menu. That will cause the change to affect all flight modes....
________________________________ From: Joe Rodriguez [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2008 7:01 PM To: [email protected] Subject: Re: [RCSE] Common trim mode on JR 9303 John, Buy some new servos... that will be a start ----- Original Message ----- From: John Kappus <mailto:[EMAIL PROTECTED]> To: [email protected] Sent: Tuesday, July 22, 2008 2:19 PM Subject: [RCSE] Common trim mode on JR 9303 Common trim mode on 9303 ? ------------------------------------------------------------------------ -------- I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only refers to rudder and aileron. All other trim controls stay in flight mode. Even with the trim mode on common, a trim change to elevator in cruise does NOT affect thermal or launch trim. Since my servos in my DLGs have some drift, it's not uncommon for me to change trim on the 1st flight. I want this change to go to everything (all Flight Modes). I can get elevator presets as changes to 'normal' trim by adding in mixes. I know I can make FM trim work by changing sub trim IF I notice the drift before the round, but true common trim might work better for this problem. What am I missing? Thanks, John
