I guess the real answer to the question of how much to pay for a servo
is as much as it takes to get the job done right!
George Voss wrote:
>
> It's back to the old "you get what you pay for" discussion. Now, I agree with you
>that price alone doesn't mean everything, but in
> general, you can figure that quality comes at a cost! No, there isn't anything
>wrong with Hitec products. There are some better
> products that do cost more. I own Multiplex, Airtronics and Hitec servos. All move
>the surface similarly. But, I can tell you that
> the MPX digitals are much stronger and more accurate than the others that I have.
>Yes, they cost a bunch more, but if you are
> planning on spending $1000-2000 on an unlimited sailplane with spares and tools
>etc., saving $100 just to save it doesn't make much
> sense to me. If you are flying a $50 Sapphire 2M, then you probably don't want to
>spend $90+ for each servo. But get a high
> performance composite or molded ship, and yes it's worth it!
>
> Finally, the less you have to spend, the better equipment you need! gv
>
> Jill and Rick Brown wrote:
>
> > Some think that the higher the price the better the product. Sometimes
> > there is a limit to how much better something can get.
> > I have heard complaints about the Airtronics 141's, the accepted
> > standard flap servo.
> > I know of some very competitive people that use Hitec servos. The
> > designer of the Mantis uses one Hitec HS-205 servo for flap. How bad can
> > they be?
> >
> > [EMAIL PROTECTED] wrote:
> > >
> > > << The consensus is that those who have tried
> > > alternative servos find them reliable and that hey perform as well as the
> > > higher priced servos for normal unlimited use.
> > >
> > > The only reason to use the 'alternative' servos is price...or those so happy
> > > with them would use 'best'.
> > >
> > > The 'best' earned their 'status' by their performance, construction,
> > > materials and reptutation.
> > >
> > > Competition allows a format for the best to distinguish themselves.
> > > Unlimited planes spend their entire lives in a competition format....thats
> > > what is normal for them.
> > >
> > > If it were true that priced servos perform as well as the higher priced
> > > servos, then there are a lot of sailplaners who feel that the 'expensive'
> > > servos are different.
> > >
> > > Price servos work fine, compared to the servos recognized through out the
> > > world as the 'best' they aren't the same.
> > > Similar, alike maybe, but not the same.
> > >
> > > You can't use lead for gold, but you can be happy with lead :-)
> > >
> > > Money is hard to come by for most of us. Most of started with the 'price'
> > > components and have drawers full of them today....drawers full not sailplanes
> > > full.
> > >
> > > In the scheme of things is the difference in cost worth the difference in
> > > value? If not, why do so many of the 'best, expensive' servos get sold?
> > >
> > > Think hard before you outfit your planes DOWN to a price, versus up to a
> > > Quality.
> > >
> > > 'and that's all I have to say about that' :-)
> > > Gordy
> > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
> > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]