You have to be careful not to stretch the thread, though. I use the same
trick, but use kevlar line from a pull pull kit (Sulivan, I think).
Matt
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, January 14, 2001 12:00 PM
Subject: Re: [RCSE] Model building tools
> Last night I used a piece of thread and some masking tape to check the
> alignment of the stab to the wing on my Style. Taped one end to the wing
tip,
> pulled it taut and stuck a piece of tape to mark the length to the stab
tip.
> Move it to the other tip and note the difference. A sliver of spruce
shoved
> ahead of the stab pivot was all it took to move the stab tip half the
> difference in distance. A little CA to hold it and Voila! all aligned!
It's
> amazing how simple some tools can be.
>
> Bill Wingstedt
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
