I built a Aquila w/ wooden fuse back in the 70s.  Painted the fuse by using
a lot of filler, primer, sanding, priming.....        It looked real
good(just like the one on the cover of RCM) but I suspect it added a lot of
weight
(cant remember the weight)  Id just use a low temp film if you are concerned
about weight- if not you can get a pretty nice painted fuse if youy spend
enough time on it.-
-----Original Message-----
From: Nick P Wisdom <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Thursday, February 01, 2001 3:36 PM
Subject: [RCSE] Balsa Fuses: Paint or Cover?


>Working on a 3M scooter with a large balsa/ply fuse.  I have always used
monocote or similar in the past, and I have never tried painting.  What are
the pros and cons of painting vs monokote?  I have a hell of a time covering
the nosecone and those pesky curves, so painting sounds attractive, but only
if I still get some added strength and a nice finish.  Any suggestions?
>
>Thanks,
>
>Nick Wisdom
>Orlando, FL
>
>
>Get your small business started at Lycos Small Business at
http://www.lycos.com/business/mail.html
>RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
>



Shop online without a credit card
http://www.rocketcash.com
RocketCash, a NetZero subsidiary
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to