If you think that $450 is too much for a small HLG plane then think again.
This thread always comes up whe new planes of whatever are out and people
want to compete.  Personally I thin it is well worth it, and I do not buy
the planes, I try to build my own.

If you look at all you out there who have good jobs, think about how much
per hour you make.  The take out the R&d expenses, and the costs of the
materials etc, you will find that you are getting away cheap!!!

How much does a person at $50K a year make per hour? Manuy make more, many
less but this number can work cor calculations.  That is before taxes.  For
each dollar the plane costs, AND assume direct from Mfder buying, you take
off say 30% for profit that runs the CO, marketing, and other expenses.  You
take 30% for profit if you ARE LUCKY, and you are down to 40% to make the
plane.  For those of you who want to flame me with corrections, this
allotment is way off the mark because you say it differently, but it gets
close.

Now at 40% of $450 you have $180.  So think that  all this is used for your
labor.  How long do you thin it takes to make the plane?  Not counting the
making the molds etc.  Say YOU make $20/hr, you have to alot 9 hours of
time.  At $25 it is 7.2 hours, at $10 it is 18 hours.  So how much time does
it take?  Well, you casn use up 10 or more hours very quickly.  Personally
it takes me 1.5 hours to wash, wax, cut cloth, and lay up a micro HLG fuse.
Then another 30 minutes to clean it up, when done.  So 2 hours per fuse,
minumum.  If you thin you can lay up more per alotted time, you can't.
There is only so much per hour you can ay up.

Now look at the wing.  Set up and cut cores, match them up, prep them lay up
the wing,.  Now thin of the packaging, and all the little items.

So now break out the costs of materials, clean up, waste, etc.

THEY are lucky they make $10/hr, if that.  the the government takes it's
share of the profits (both in profit and the IRS taxes) and there is nothing
left.

I think you should run like a bandit if you buy one of those ships.  Since I
like to design I have parts around for people to buy.  Why, because I like
to see people have the opportunity to try my fuses, and I see what I need to
try to design next.

Personally, I like to fly and keep it cheap, so if HLG contests go the way
of F3B, I will stay away from them for competiton since you are going to
need the best to perform with them.  I'll still to the fun like so many
other have.  This is one of the reasons why F3B is not as popular in the US
as perhaps other places.

Thermals,
Chris Adams

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to