I would like to reiterate a request that we all start lobbying for a new
radio communication standard that does not require frequency control. Cell
phones do it. Wireless networking uses spread spectrum frequency hopping to
prevent sniffers from getting on the network. Start pummeling the
manufactureres with requests for a better solution. We have the technology.
A thermal site that my club flies at is a half mile from a community. If
someone in there is does a bench check and a glider lands on a house, well
there is just one less flying site to worry about. How about when someone
shows up at the field only to find out that they left their transmitter on
after some range checking and tuning at home? I was just talking to a
friend who flies power whose son turned on his second transmitter and
crashed a 40 sized plane at full throttle.
Take some time out of building and flying and _ask_ for a better solution.
The hobby will be better and better protected by it. Without market
pressure, the manufacturers have no incentive to change what is making them
money. Need, our need, will drive the industry. Think about where the
micro radio gear was even a couple of years ago. The need for user
implemented frequency control has to go.
Sorry if I am getting obnoxious but I feel strongly about this. I don't
want to have to drive three hours just to fly a plane out in the stix and I
certainly don't ever want to be involved in an event that has caused harm to
others. Right now, it is too easy to blow someone elses control with a
flick of a switch.
Tom Koszuta
Buffalo, NY
----- Original Message -----
From: "Brett Jaffee" <[EMAIL PROTECTED]>
To: "Thomas Jascur" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, June 12, 2001 3:26 PM
Subject: Re: [RCSE] Off-site flying / freqency control
> Thomas Jascur wrote:
>
> > I was in the hobby for about a year until I got the idea that it is
possible
> > to fly at inofficial sites. What gave me the idea was one of those cool
> > videos where a hot R/C pilot did a road trip across the USA and flew his
> > gliders at every possible hill, dam, bush line or fort wall.
>
> Hmm. As a slope flier, I find that an interesting perspective. Although
I'm an AMA member, the only club I belong to is for power planes (that was,
in fact, the reason I joined the AMA). Most the soaring I've ever done has
been on top of a hill, in a decidely non-club atmosphere. Driving around
looking for the best spot to fly from isn't all that uncommon. Of course,
we know about all the good local spots in our area, so we know when it would
be unwise to try out a new hill that might be too close to an existing one.
I suspect that most slope soarers in California share this experience,
except for more formal flying sites like Torrey Pines. If we only ever flew
at AMA sanctioned club field or hill, we would not be able to fly very
often.
>
> This is why the park flier debate is kinda interesting to me as a slope
flier. I think most slope fliers I've ever met would meet the definition of
"renegade" that has been mentioned on this list, in that most are not
members of clubs with established flying sites. I guess it helps that a
slope is a more centralized flying site then a big park, so the more
experienced pilots can keep an eye on the newbies and hopefully keep them
from hurting their planes or the people around them.
>
> Brett
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]