Ok, with a lot of suggestions and a lot of button punching I got the
V-Tail/Electric to work on the Stylus with a Hitec 555 RX.
I had to reverse the throttle servo for one thing. That got it to work with
the Hitec Flash 5 (which will not work with a v-tail on the right stick). I
then came upon one of the combinations to get the Stylus to work (there
seems to be more than one).
I also found that one of the pins in the speed controller Rx plug was
mangled. I am going to completely replace that controller lead to the Rx
with a new one.
The Stylus/Hitec 555 combo setup was:
-Wing-type: 2A2FER
-V-Tail: A
-Set up C-Mix1: Master=Aileron, Slave = Ru 100% in both directions
-Turned on C-Mix1 in SW menu.
V-Tail channels : 3 & 4
Throttle channel: 5 (reversed)
Channels 1 & 2 are open for Ailerons. There was a good suggestion to use
the 2A1FER-F5B wing setting and assign the throttle to a switch and thus
leave ch 5 open for use with flaps. I'm sure if I spent enough time, I
would have gotten that as well (and may still) but for now, "if it ain't
broke, don't fix it!"
Thanks for all the help!
Dave
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]