Hi Dave
I have the same problem using a 555 Rx and a JR 8103. This will not operate
a Ballasch OSC-4 speed controller and Speed 700 motor. Everything works fine
though with a JR Rx. Looks like the 555 Rx doesn't like speed controllers.
Comments anyone? No other problems with the 555.

Regards
Richard Knott

Bell Equipment Co. South Africa
Wheeled Loader Marketing, Specials & Aftersales Support
+27 (35) 907 9325 (ph) +27 (35) 907 9611 (fax) +27 (0) 82 775 8061 (mobile)

----- Original Message -----
From: "Dave Seay" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, July 29, 2001 9:42 PM
Subject: [RCSE] Speed control


> I just got  a Koleos from ICARE and have run into a problem.  I have
emailed
> them but it will probably be a while before I hear from them and I am not
> expecting a good answer.
>
> I had things electrically hooked up, with the motor in the plane and it
ran
> fine when I tested it.  I continued working on servos, etc. and when I
came
> to final testing, the motor would not run. After looking all over, I
finally
> realized that 1 of the 3 leads from the Rx to the speed control had broken
> (the orange, signal lead). I noted the color of each connection, removed
all
> three, cleaned out the holes, resoldered the leads and ...nothing.  The
> battery, when touched to the motor leads fires up the motor fine.
>
> With everything hooked up, both v-tail servos work but not the
> motor/controller.  I can even put a servo in ch 3 on the 555 Rx and it
> responds correctly to the throttle stick. When I put the controller lead
> back in ch 3, nothing.  The battery reads 9.1v using a loaded volt meter.
I
> also tried 2 different 555 Rx's.
>
> Is there anyway I can confirm that the controller is dead before I replace
> it?
>
> Dave
>
>
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]



*********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
Fprot for the presence of computer viruses.

mail.bell.co.za
**********************************************************************
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to