Despite the temp being in the low 20's, got out and got my first flights on
my NYX. I have a tweak or two before tomorrow and flying at the DARTS
field, but this thing has mega legs and can still be cranked down to nothing
in turns.
A couple of things pertaining to this and many other designs using all
carbon/kevlar material in the fuse that was a real mind bender for a bit.
Started with JR credit card RX's, no way they would go with either the
antennae in or out of the fuse, put in an Airtronics 785 with the antennae
outside and got range, but barely, these are different beasts. I will order
a 92777 RX just to cover my base, Tom Copp says they are the way he goes and
that is what I will do. The second is the use of JR 368 digital servos. I
cannot imagine using any other servo for a minimum of flaps on any ship, and
would like to use more. They center better and give all the guts to throw
top actuated flaps that 80 degrees of throw you need. Remember that these
are the same size as 341's and what many thought 341's would be. I know
that another top actuated flap ship I had, 141's just could not do it, these
are incredible little packages. I would guess the next size up of this
series, a midsize that would fit many wings, is just as good and has even
more torque.
Want to thank Tom and Pat McCleave for some help on the electronic
questions, looking forward to PHX with the ship, should be a rip.
Marc
Spec:
Weight-74 ounces (4 ounces to get to balance)
996 squares
Full Carbon Skin-very stiff
32 ounces of ballast provisions
Servos-JR 368's - Flaps
HS 85's - Ailerons
HS 225 - Stab
JR 341 - Rudder
6 Volt 1100 Mah NiMh Battery
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]