CNC machining is expensive. Let me show you why. I just drew a single taper 7037 wing with 8.75" root and 5" tip and a 1 meter length. (5 minutes drawing time) I ran a tool-path over it at .01" step-over. That means that the cutter would run over the surface in a chord-wise contour every .01". The resulting program, which could be sent to my mill would run for 15 hours, 41 minutes. (and 20 seconds. At least that's what the software tells me). If I cut this with a .125 ball end mill, which would get most of the leading edge all of the way out to the tip in 7071 aluminum it would probably take a skillful and patient person about two days to sand it out smooth and shiny. A rough estimate for a set of right and left, upper and lower open-face molds might be like this: Set up (CAD, CAM, Machine set-up) $500; Machining $4900; materials $315. And if you sand it yourself (and all goes well) you can save about $5000. Total cost $10715. The prices on a set of wing molds might be scaled by the square inches of surface of area in the mold. For the above example, if you doubled the span just 4X the price.... (2 times as wide and 2 times as long)
Of course these molds would last a very long time (thousands of parts) and on my machine should be accurate to with in +/- .0002" everywhere. I use Mastercam and a 3-axis machining center on a daily basis. Someday I'll get that machine out of my garage and put the cars in there where they're supposed to be. Mostly I cut ABS plate material and 20 lb (density per cubic foot) urethane foam from which I make models and prototypes for Industrial Design and engineering clients. The level of Mastercam I run costs right around $14K and runs great on my 1.3/P4 PC. The mill I have is on the cheap end of machines at about $70K. If I were cutting a one-off set of molds (not hoping for more that one set of parts) I would use 40# foam. (General plastics, Tacoma, WA) The above wing molds would sand out in about 2 hours. They would have to be filled and at least primered and sanded a bunch more before waxing. Even with this preparation (6-8 hrs), part of the mold surface might come off with the FG part. If I wanted to make a couple of parts I would use ABS plastic, sand it out until shinny and then go for it. Both materials are really flexible and would need to be attached to something rigid to keep them true to the part shape. Right now is a great time in our national economy for getting something fab'd. Companies are bidding aggressively and schedules are open. For stereo-lithography check out www.harvest-tech.com. Carey RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

