Been there - done that. NO - you CAN'T program it for flaps on 2 channels - read the manual! What you can do is get a servo reverser for the other flap and a Y-connector.
Another thing you can't do - Have BOTH launch flaps and landing without using an alternate model and now HALF of your model memory for 2 of 4 models! To get launch flaps the BEST solution is to go ahead and use another model and set the flaps on that model in the launch position. Use the ALT MODEL switch to select that model for launch. When out of launch mode (ALT MODEL) the flaps are operated off the throttle lever as usual. -----Original Message----- From: [EMAIL PROTECTED] [mailto:Winch.RP@;forces.gc.ca] Sent: Thursday, October 17, 2002 2:57 PM To: [EMAIL PROTECTED] Subject: [RCSE] Help - 2A2FER(V-tail) Infinity 660 I can't find a way to activate the second flap! I can gang them together on the same channel but then I have to mount one of them asymmetrically (i.e. facing the same way). I really don't want to hack an larger hole in the wing to do this. Come on guys, somebody must have figured this out. Phil in Vancouver RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. ******************************************************************************** This message is intended only for the use of the Addressee and may contain information that is PRIVILEGED and CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify Space Imaging immediately. ******************************************************************************** RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
