I had a similar problem on a zagi a few weeks ago an was able to solve it by slightly over-twisting the wing to remove the warp and then maintaining the twist using 3/4" strapping tape. Start on one side of the wing and attach around 4-5" of tape at around a 45 deg angle to the leading (or trailing) edge. Then wrap the tape around the edge as you hold the counter-warp and attach to the other side with 4-5" as well. Around 3 of these totally removed my warp and has lasted 30-40 flights since then. The trick is that the tape must be at an angle to the edge so that it spirals around the wing. At a 90 deg angle it can't hold your counter-warp.
-Richard --- In [EMAIL PROTECTED], "Jeff Nibler" <[EMAIL PROTECTED]> wrote: > I have a 48" EPP foamie covered in strapping tape, then Ultracote. One of > the wings is twisted and I'm wondering if there is a way to fix this. It's > not twisted that bad, but is noticable and causes me to compensate with > aileron trim. I tried twisting it the other way and using a covering iron > for a while which seemed to work, but some hours later, its mostly reverted > to its old shape. Maybe I need to do it longer? Thanks in advance for any > help. > > Jeff > > _________________________________________________________________ > The new MSN 8: smart spam protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

