You could try doing a PMIX from channel 7 to channel 3 (make sure LINK is turned on in the mix). The thing is, the Futaba uses the throttle (which is normally channel 3) for the airbrake functions in glider mode, so I'm not sure that would really work.
At 10:17 AM 1/18/03 -0800, Martin Cleary wrote: > So there is a way to change the program to swap ch 3 with 7? ----- >Original Message ----- From: George Voss To: Martin Cleary >Sent: Saturday, January 18, 2003 9:36 AM Subject: Re: [RCSE] newer 6 >ch hitec w futaba 8u tx > gv > >Martin Cleary wrote: > Do I need a channel 7 to run two flaps with my >Futaba 8u? Thanks Martin > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.