AW: AW: [RCSE] New USA Picalario owners...some information

Mon, 21 Jul 2003 00:29:12 -0700

Hi Chris,
 
just hold down the programming key on the picolario while turning power on.
Picolario starts in "programming mode". Use your 3-position-switch to change
to mode 5 (one up or five down :-))
Press the blue "programming key" to enter mode 5. then change the value with
your 3-pos-switch. Press the blue key again to save. turn off your picolario.
 
Your settings are changed now!
 
Yours
Raphael
 
 
-----Ursprüngliche Nachricht-----
Von: Chris Veitch [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 21. Juli 2003 09:19
An: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Betreff: Re: AW: [RCSE] New USA Picalario owners...some information

So how do you set mode 5 up and how does it actually operate?

Thanks

Chris
----- Original Message -----
Sent: Sunday, July 20, 2003 6:22 AM
Subject: Re: AW: [RCSE] New USA Picalario owners...some information


if there is no free channel just connect it to your receiverbatteries,
You will have variotone , altitude announcement as preset in mode 4,
I prefer every 10 s, and voltage if it is sinking.
But you have to set glitch warning to off (setmode5), because there can be none
correct pulse, if it is just connected to batteries.
It is also possible to use a 2-position switch, one position automatic alti announcement
and the other Vario off (for acrobatics) .
 
Thommy 

Thanks Thommy!
Of course all I have to do for the straight to battery connection is pull the signal wire from the Pic's plug, and leave it in the Gear channel.

Gordy

Reply via email to