Mark: I have used your 3 meter rubber on my BoT w/o any problems extending rubber 3x original length. I made mine a 3piece wing. Center section has a full hardrock maple joiner going three bays on either side of the center line. Also used 3/4oz glass cloth on the sheeting 3 or 4 bays on each side. 1/4" nylon bolt in front of main spar and 4:40 nylon bolt at the trailing edge for hold downs. Stan
----- Original Message ----- From: "Aerofoam" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, September 25, 2003 9:31 PM Subject: Re: [RCSE] Hi-Start HELP > I now own an ARF > > > BOT and would like to know from some who have flown one off a hi-start what > > > kind you would recommend. > > I have had a few of these inquiries and I honestly don't know what to recommend, > especially > since they are folding up on launch frequently. > My gut feeling is that the 2m comp. would be the best bet, but it SHOULD be able > to take the 3m. rubber. > What do those of you that fly the BOT think? > > Mark Mech > www.aerofoam.com > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
