Hi Walter, Thanks for sharing your experience about CG settings. I tell you flying them both back to back it was like night and day!! Of course, this was because the Nyx was a bit nose heavy and the Extreme was tail heavy.
The first time the Extreme was hand tossed, I could immediately tell the CG was pretty far back for my flying style. Actually, for my flying style it was pretty darn hairy, so I added some down elevator and re-tossed again. It felt better and I was comfortable enough to try a winch launch at that point. After flying the Extreme a few times it was easy to observe that the ship was talking to me much more so than the nose-heavy Nyx had been -- in fact the DPR seemed to talk very loudly and be a bit edgy. I liked the feedback, but not the constant correcting that was needed. When I got home, I decided to compare the CG referenced in the Xtreme F3J review article in S&E Modeler with the Extreme DPR I got from you. The article mentioned a CG of 107mm for the Eraser Xtreme (v-tail). I measured the Extreme DPR's CG to be around 130mm. "Wow" that's what I said, really. I moved the Nyx CG from 4.1 to 4.2 inches the next time I went to fly it. After a couple of flights, I confirmed that the Nyx was not a bit talkative than before (but still not quite like the Extreme has been). So for the next outing (this Saturday), I plan to move the Nyx CG to around 4.4 inches and take it from there. And I plan to move the Extreme's CG to around 120mm and see if I like that better. Well, that's my story and I'm sticking to it. Regards, Mehrdad btw, as far as the Sharon Pro 3.7 V-tail that Don got from you, I wasn't there for the maiden so I don't have all the details, but apparently something bad happened during the 4th or 5th winch launch. The nose of the Sharon fuse met terra firma without invitation. Details and pics posted here if interested: http://www.bayrc.com/boards/viewtopic.php? t=468&start=0&postdays=0&postorder=asc&highlight=sharon Though the fuse may be repairable, I think Don has/will be ordering a X-tail fuse for it (what can I say, he loves that ship). --- In [EMAIL PROTECTED], "gldr guy" <[EMAIL PROTECTED]> wrote: > Hey Mehrdad. Not sure about the NYX and dont really use the dive test. On a new plane I just keep moving the Cg back til its uncomfortable for me to fly then add a little weight back in the nose. When I get really comfortable with that I do the whole thing over again. I find for me > it takes a month or so, depending on how much I fly to really get the Cg fine tuned for my flying style. I also dont set in stone the exact Cg. If I am having to fly waaay out to my visibility limits for lift I may even move it > forward a bit. This is how I set the Cg on your Extreme and it seems work for me. Id even venture to say if you did dive test it would be pretty neutral. BTW, is the Sharon really gone??? Tell me it aint so! > Walter > --- > GG > > On Thu, 08 Jan 2004 07:05:40 > Mehrdad Amir wrote: > >I'm curious what CG location Nyx TD pilots are using. Especially in > >days where there's light thermal condition days. Also > > > >Initially the CG on my Nyx was set to around 4.1 inches back from the > >wing root's LE, and it flew nicely in light conditions. Since I moved > >the CG back to 4.2 inches from LE (as recommended by Tom Copp's F3X > >website) it appears to be flying better than before. So now I'm > >wondering how much further back I should try. Will setting the CG 4.5 > >inches from wing root's LE -- be just too far back? > > > >Thanks in advance, > >Mehrdad > > > >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. > > > > > ____________________________________________________________ > Get 25MB of email storage with Lycos Mail Plus! > Sign up today -- http://www.mail.lycos.com/brandPage.shtml? pageId=plus > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.

