> Tom is right on point. I'd like to see a good definition that clearly
> divides the scale/performance planes that happen to be made from EPP
> from the EPP combat wing and the like.

It is usually easy to differentiate at first glance.
It is obvious if a plane is built to be scale or for performance.
A combat foamy usually has very little resemblance to a scale plane
or a performance plane and a combat wing is what it is!
My foamy Corsair only has 2 small deviations from scale and they
are nearly impossible to see when it is in the air.
Of coarse it is possible to build one as a tape ball and thrash it,
but this would be evident too. It should be made clear to all that
the CD has the final say on what flys and if it looks like a tape ball
and flys like a tape ball, it will only be allowed in the air during
"after hours" events.
This is like the whole jet ski debate. Here in the San Juan Islands
they banned them completely. This is unfair punishment for those who have the
larger 2 or 3 seat personal watercraft and only use them as you would
use any boat, but it came about because of
HOW the craft was USED  by a bunch of yahoos that just wanted to tear
up a patch of water.
Don't throw out the baby with the bath water.
EPP makes a good rugged plane, it doesn't have to be a combat foamie.
I could get a beater composite scale plane, fly recklessly and do A LOT
more damage than even possible with an epp scale plane.
Just make it clear that the CD has the final word on
who and what flys and that reckless flying
won't be tolerated.

Mark Mech
www.aerofoam.com


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to