Hey Dances with Buzzards and All. OK, to further plug my Super Stabs !!! They are similar in construction to the stabs PWT was importing a couple of years ago. Made in the USA and sell for less. C/F L.E., Spar and T.E. Area of 120 sq. in. average weight 1.5 oz.with Joiners. Airfoil is NAAC 009 .The main joiner is 1/8" O.D.C/F tube with a 1/16" MW core rear is 3/32" O.D. C/F rod. Covered with Ultracote transparent ( Red and Yellow ) stock or custom color. One item of interest is the root rib at the main joiner is counter sunk to allow for a small build up of epoxy around the pivot tube. The stabs are available with 1-1/5" and 2" centers. Also as a companion I can provide a Rudder with matching construction. Price for the Super Stab is $50.00 each and $15.00 for a matching Rudder, there is $5.00 S&H Hope this answers some of your questions, I can also make up custom Stabs as well as 2 Meter size. Thanks for the band width. Ed.
----- Original Message ----- From: "ICTHRMLS" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 17, 2004 6:27 PM Subject: Re: [RCSE] Emerald CG > > Whyte Wings wrote: > > *Hi Steve and all > > Just a quick plug for my Supper Stabs. * The plug would have been better with some info related to the topic. > > Steve - try 5-1/2 from the trailing edge for a good starting point. > > > -- > ICTHRMLS - aka: Dances with Buzzards > -------------------------------------------------------------------------- --------- > Posted from the RCGroups.com Discussion Forums. > Visit us at http://www.rcgroups.com <------- Win free R/C Gear! > View this thread at rcgroups.com: http://www.rcgroups.com/forums/showthread.php?threadid=200537 > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.