Hey Guys I goofed !! ( first time ) the center on the joiner rods should be 1-1/2" not 1-1/5 ----- Original Message ----- From: "Whyte Wings" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "ICTHRMLS" <[EMAIL PROTECTED]> Sent: Wednesday, February 18, 2004 12:39 PM Subject: Re: [RCSE] Emerald CG
> Hey Dances with Buzzards and All. > OK, to further plug my Super Stabs !!! > They are similar in construction to the stabs PWT was importing a couple of > years ago. Made in the USA and sell for less. > C/F L.E., Spar and T.E. Area of 120 sq. in. average weight 1.5 oz.with > Joiners. Airfoil is NAAC 009 .The main joiner is 1/8" O.D.C/F tube with a > 1/16" MW core rear is 3/32" O.D. C/F rod. Covered with Ultracote transparent > ( Red and Yellow ) stock or custom color. One item of interest is the root > rib at the main joiner is counter sunk to allow for a small build up of > epoxy around the pivot tube. The stabs are available with 1-1/5" and > 2" centers. Also as a companion I can provide a Rudder with matching > construction. Price for the Super Stab is $50.00 each and $15.00 for a > matching Rudder, there is $5.00 S&H > Hope this answers some of your questions, I can also make up custom Stabs as > well as 2 Meter size. > Thanks for the band width. > Ed. > > ----- Original Message ----- > From: "ICTHRMLS" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, February 17, 2004 6:27 PM > Subject: Re: [RCSE] Emerald CG > > > > > > Whyte Wings wrote: > > > *Hi Steve and all > > > Just a quick plug for my Supper Stabs. * The plug would have been > better with some info related to the topic. > > > > Steve - try 5-1/2 from the trailing edge for a good starting point. > > > > > > -- > > ICTHRMLS - aka: Dances with Buzzards > > -------------------------------------------------------------------------- > --------- > > Posted from the RCGroups.com Discussion Forums. > > Visit us at http://www.rcgroups.com <------- Win free R/C Gear! > > View this thread at rcgroups.com: > http://www.rcgroups.com/forums/showthread.php?threadid=200537 > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" > and "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with > MIME turned off. > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
