I've got some nice light slopers available with an EPP leading edge.
Checkem out at http://www.slofly.com
 
At the moment an all EPP 1.0 flying wing is in the works.
So far so good but the elevons may require a carbon rod for stiffness.
 
On the agenda is a lightweight HLG.
Considering using EPP 1.0 and a .125 carbon spar.
Still deciding on wing width and fuselage length.
 
My flying news for the day:
Flew a 7.4oz flying wing that has 10oz thrust and it was fun.
Motor: Nippy outrunner.
Controller and motor as package cost $114 at hobby lobby
3 Cell lithium for only $20 per pack!
 
Usually fly with a 280 motor and 8.4volt nimh pack.
 
Photo here:
http://www.rcgroups.com/forums/showthread.php?postid=1856148#post1856148
 
Glider creation news:
Thinking about having the wings ailerons controlled with the right stick but mixing them and having the left stick control a crow and flap effect on them. Up and down on the right stick would do elevator. Reason- to get a feel for wing camber. Radio: flash 5x. Not sure if it can do mixing as stated. Anyone know?
 
 


Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.

Reply via email to