On Fri, Oct 15, 2004 at 02:50:54PM -0400, Douglas, Brent wrote:

| Can anyone give me the quick idiot's guide to using a trainer cord?  Do
| you have to trim both radios to match

Yes.  You do this by holding both transmitters and switching back and
forth between transmitters and making adjustments until nothing
changes when you switch.

| do they both need all the same mixing set up (eg, elevon, etc)?

Yes, unless you've got a high end `master' radio which can decode the
slave signal then apply it's mixes to it.  The Futaba 9C can do it,
and I don't think many other radios can (but I can't be sure.)

If your radio isn't one that can do this, you just need to make sure
that the controls do the same things on both radios.

|  Is it considered "safer" to pull the crystal from the trainer box?

Yes, though that's not really needed.  I don't know about Hitec, but
with Futaba you generally don't even turn the buddy box on.  If you do
have to turn the buddy box on, I'd suggest removing the crystal or
module just to be safe, though they should turn off the transmitter on
their own.
 
| He's planning on using his regular Hitec radio and an older Flash that
| he has lying around.

Just make sure that the controls are the same for master and slave
before you fly :)

-- 
Doug McLaren, [EMAIL PROTECTED]    For adult education nothing beats children.
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.

Reply via email to