Aloha John. I talked to "Stylus Boy" Tom Hoopes and he sent me a set of instructions to setup an electric motor sailplane with the Stylus. The instructions allow you to still use the flaps stick with the flaperon/spoileron and have proportional throttle control via the side slider. If you didn't figure it out yet, email me and I could send you the instructions.
Al Battad - WH6VE AMA #506981 -----Original Message----- From: John E. Hatlelid [mailto:[EMAIL PROTECTED] Sent: Sunday, February 13, 2005 2:21 PM To: soaring@airage.com Subject: [RCSE] Airtronics Stylus prgraming help I have a Stylus with the extra glider card and am trying to setup a plane with motor, ailerons, elevator, and rudder. In the manual for the glider card, I find the option for changing the wing type to 2A1FER for an F5B setup. I think I have done this properly and have aileron, elevator, and rudder servos responding correctly. I can not seem to get the throttle to work with the speed controller and power the electric motor. I feel the problem might have to do with end point adjustments or some other aspect of correctly setting up the throttle channel. I would appreciate any detailed information on how to complete the setup of the throttle channel. Thanks, John Hatlelid RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format