I use only black rubber CA, IC-2000, you can't pull them apart, and never had one fail.
I see on www.centralhobbies site they recommend JB Weld on the rods they sell, but I've never had a reason to try because the rubber CA works great. Dave Hauch Mich. ----- Original Message ----- From: "Bruce Hobbs" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <soaring@airage.com> Sent: Monday, March 07, 2005 10:38 AM Subject: RE: [RCSE] Carbon Pushrod Help! > John, > Method I use for all carbon pushrods to metal fittings is wrap the > carbon rod with super thin Kevlar thread until it is a tight push fit > into metal fitting that has been cleaned and de-greased.....thin CA the > intersection of fittings to carbon rod.... and on test the threads > stretched / or the clevis opened up before the carbon to fitting joint > failed. > > BCNU > Bruce Hobbs > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
