On 11/15/2010 09:56 PM, Willy Lambert wrote: > Ok thanks for all Wolfang, you are an angel to deal my request with such > efficiency.
You are welcome. > I am already waiting for an answer from Ixxat. We would appreciate better community support from IXXAT, but well... > I will check resistors terminaisons > I will manage to record something with an analyzer, could you describe what > should I look at ? Just messages ? Particular messages like Emergency ? > Heartbits ? > > and I will inform you about this. With an external CAN controller or analyzer you can send and receive messages which will help to understand the problem, e.g. if a CAN message got out to the bus. Nothing special is needed. As said, a supported and known to work CAN card connected to another PC or Laptop would already be fine and less expensive than a CAN analyzer. > Is there any chance that rtCan drivers manage this hardware better ? Because > we were firstly going to use a xenomai kernel and then turn back into a > nature one for planning issues. As we need the can interface to go on, it is > possible to change this. I do not expected the RT-Socket-CAN ISA driver for the SJA1000 to behave differently. Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
