On 11/29/2010 10:00 PM, Willy Lambert wrote: > My docs says : > _ basis adress (0xD0000 for me) + 0x0000 to 0x00FF : CAN-Controller 1 > _ basis adress + 0x0100 to 0x01FF : Reset CAN1 > _ basis adress + 0x0200 to 0x02FF : CAN-Controller 2 > _ basis adress + 0x0300 to 0x03FF : Reset CAN2 > So I there is still a stange difference between one controller range and the > 0x20 byte register of SJA1000. Maybe the only problem interfacing my board > with socket can is here...
Well, it just says that the Reset-Region starts at offset 0x200. Does the IXXAT driver touch that region? If yes, where? And how are the registers accessed? > They told me explicitly to use only one IRQ for both controllers : > >> me > I can't write irq=5,7 as stated in the docs >> ixxat > Please use the same IRQ for both CAN controllers. OK, then irq=5,5 should just work fine. > But anyway, at the moment making just one working is enougth. I will setup > the second one when I'll have something working. > > I'll do my best to instrument this code and give you the result Good luck. Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
