Hi Willy, On 04/27/2011 03:11 PM, Willy Lambert wrote: > 2011/4/27 Heinz-Jürgen Oertel <[email protected]> > >> Am Mittwoch, 27. April 2011, 13:56:10 schrieb Willy Lambert: >>> 2011/4/27 Willy Lambert <[email protected]<mailto: >> [email protected]>> >>> Hi all, >> >> >> Hi, >> you did not mention that you have checked the >> IRQ jumpers on the PC104 board, but I'm sure you did. When you say >>> _ one PC104 CAN board with configured jumpers. >> I assume you are using this board first on the "old CPU board" >> next on the new CPU board without changing the jumpers. >> In this case, no idea. >> > > that's it, I did not touch anything on the PC104 stack. So the jumpers are > well configured in both cases. And I did the tests several times, they could > not have been disconnected by error. > > I recheck my linux 2.6.35.7 .config files, and they are identicall on both > CPU boards.
You said, the hardware is identical, same cpu, motherboard, etc., right? Do you see any diffenrence in the bootlog if you boot the same kernel? Wolfgang. _______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
