On Wednesday, July 25, 2007 at 06:53:37 +0200, Maurice Janssen wrote: >Perhaps the GND levels of the DWL-P50's is different when set to 5 or 12 >Volt output? That would cause a short-circuit current that destroys the >USB port. You can measure the voltage between GND of two adapaters >without the Soekris and USB hub connected. If you measure (very close >to) 0 V between both GND outputs, you can't use them like this.
Oops, that should have been: If you DON'T measure close to zero, you can't use them. Maurice _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
