At 08:21 PM 3/22/2008, Mike Kelly wrote:
>Is there any trick to getting this to work, or could I have a bad board?
> Everything else on the board appears to work properly.
Havent tried the 5501s on LINUX, but I do know they work under
FreeBSD. If you can, try it as it should work. We have a fair
number in the field that have apc upses hooked up via USB and they
work just fine
# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
AMD(0x0000), rev 1.00
port 1 addr 2: low speed, self powered, config 1, Back-UPS ES 650
FW:825.B1.D USB FW:B1(0x0002), APC(0x051d), rev 1.06
port 2 powered
port 3 powered
port 4 powered
# apcaccess
APC : 001,034,0896
DATE : Sat Mar 22 20:53:14 EDT 2008
HOSTNAME : p267.sentex.ca
RELEASE : 3.10.18
VERSION : 3.10.18 (21 July 2005) freebsd
UPSNAME : RAPIDS
CABLE : USB Cable
MODEL : Back-UPS ES 650
UPSMODE : Stand Alone
STARTTIME: Tue Mar 04 11:06:39 EST 2008
STATUS : ONLINE
LINEV : 113.0 Volts
LOADPCT : 6.0 Percent Load Capacity
BCHARGE : 100.0 Percent
TIMELEFT : 35.0 Minutes
MBATTCHG : 40 Percent
MINTIMEL : -1 Minutes
MAXTIME : 0 Seconds
LOTRANS : 088.0 Volts
HITRANS : 139.0 Volts
ALARMDEL : 30 seconds
BATTV : 13.5 Volts
NUMXFERS : 2
XONBATT : Tue Mar 18 11:08:56 EDT 2008
TONBATT : 0 seconds
CUMONBATT: 9 seconds
XOFFBATT : Tue Mar 18 11:08:57 EDT 2008
STATFLAG : 0x02000008 Status Flag
MANDATE : 2007-04-25
SERIALNO : 5B0717U07855
BATTDATE : 2000-00-00
NOMBATTV : 12.0
FIRMWARE : 25.B1.D USB FW:B1
APCMODEL : Back-UPS ES 650
END APC : Sat Mar 22 20:53:16 EDT 2008
---Mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
