Hi Just tested BIOS 1.33b and it works, even after Linux reboot. And there is another difference: 1.33 and 1.33c always had a long waiting time between RAM check and PCI information (around 10 seconds). 1.33b just needs a second to detect the CF card.
On Wed, 15 Oct 2008 17:27:29 +0200 "Thorsten M." <[EMAIL PROTECTED]> wrote: > After upgrading to BIOS 1.33c it boots, but only if the power cable has been > disconnected > before. When I do a reboot from Linux the board doesn't recognize a CF > card. Same problem if I power up, enter the BIOS and do a reboot from > the BIOS. > Tested with 2 CF cards: > 1. > Silicon Systems SiliconDrive CF 2GB SSD-C02G-3500 Lot Code: SS139383 > First Bootscreen: > 0512 Mbyte Memory CPU Geode LX 500 Mhz > > Pri Mas SILICONSYSTEMS INC 2GB LBA Xlt 1016-64-63 2049 Mbyte > > > 2. > Silicon Systems SiliconDrive CF 4GB SSD-C04G-3500 Lot Code: SS142194 > First Bootscreen: > 0512 Mbyte Memory CPU Geode LX 500 Mhz > > Pri Mas SILICONSYSTEMS INC 4GB LBA Xlt 1023-128-63 4125 Mbyte > > > > Bootscreen of both cards after reboot: > 0512 Mbyte Memory CPU Geode LX 500 Mhz > > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > ------------------------------------------------------------------- > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > > > Then it enters PXEBoot even if PXEBoot = Disabled in the BIOS. > > Both cards were bought together with the boards at > http://www.bytemine.net/de/soekris_order > Cards tech info: > http://www.siliconsystems.com/pdf/SiliconDriveCF.pdf > http://www.siliconsystems.com/silicondrive/noWearOut.html > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
