On Wed, Oct 15, 2008 at 6:57 PM, Alexandre Dulaunoy <[EMAIL PROTECTED]> wrote: > On Wed, Oct 15, 2008 at 5:27 PM, Thorsten M. <[EMAIL PROTECTED]> wrote: >> After upgrading to BIOS 1.33c it boots, but only if the power cable has been >> disconnected >> before. When I do a reboot from Linux the board doesn't recognize a CF >> card. Same problem if I power up, enter the BIOS and do a reboot from >> the BIOS. > > We have 1.33c BIOS too with 5501-60, and the warm reboot doesn't work too. > > We also tried all the option of "reboot=" (b,f,c) parameter from Linux > kernel without success. > > Do you see any other way to make a "warm reboot" work on 5501 with > 1.33c? or a new BIOS to > fix the issue?
I don't like to reply to my own email but to solve this issue. The only technique to make the warm reboot working is to replace the flash with another brand (from Silicon Systems 1GB (from kd85) to transcend). -- -- Alexandre Dulaunoy (adulau) -- http://www.foo.be/ -- http://www.foo.be/cgi-bin/wiki.pl/Diary -- "Knowledge can create problems, it is not through ignorance -- that we can solve them" Isaac Asimov _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
