Hi list,
I was looking today at the Intel Atom E6xx specifications, and it seemed
that it was an Intel 32 architecture only.
I must say that I’m a little lost here because I have been running OpenBSD
amd64 on it for about 2 years, and the only issue I had was that the on-die
temp sensor wasn’t working.
However a patch was recently submitted in "-current" for it. on the daily
change log it was written: "Detect on-die temp sensor for Atom E6xx on
amd64."
But I was wondering if the Soekris CPU E6xx is really a 64 bit CPU ? or if
the openBSD kernel amd64 includes 32-bit in it. In this case, I might
reinstall my system.
Yesterday I also extracted the patch from "-current" and applied to my 5.3
kernel, now sensors are working.
Here is a part of my dmesg :
OpenBSD 5.3 (GENERIC.MP) #0: Thu May 9 22:31:27 EDT 2013
r...@io.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1072562176 (1022MB)
avail mem = 1021571072 (974MB)
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Genuine Intel(R) CPU @ 1.00GHz, 1000.12 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU @ 1.00GHz, 1000.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu1: 512KB 64b/line 8-way L2 cache
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0a1202000a12
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz: speeds: 1000, 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x03
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not configured
"Intel EG20T Ethernet" rev 0x01 at pci2 dev 0 function 1 not configured
"Intel EG20T GPIO" rev 0x00 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x01: apic 0 int 19
usb0 at ehci0: USB revision 2.0
Cheers
_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
