The IQ Demoulator is ZFMIQ-10D.
--- In [email protected], "Daniel Jackson" <[EMAIL PROTECTED]>
wrote:
>
> David
>
> Out of curiosity so I can look up these parts. What parts numbers
> are they?
>
> DJ
>
> --- In [email protected], "David" <david_salomon@> wrote:
> >
> > For those of you that have another radio with a 10.7MHz IF tap,
here's
> > another SDR option.
> >
> > Mini Circuits (www.minicircuits.com) makes fairly inexpensive IQ
> > demodulator modules. For $89, you can get a small module that
has 2
> > inputs - RF and a 10MHz reference frequency, and I and Q outputs.
> >
> > You can get an inexpensive 10MHz reference frequency from AADE -
$39
> > for the board or $49 with the enclosure.
> >
> > Hook the I and Q outputs to your soundcard and instant SDR!!
> >
> > I am using this setup with my AR5000A and it works GREAT. I had
to add
> > a low noise amplifier to the IF output to get the signal up out
of the
> > noise - I used an ICE 130B ($59) - it's rated for the entire HF
range,
> > but is very low noise and works very well. I am using a E-Mu
0202
> > external USB soundcard ($150) - it will do up to 192KHz
sampling. So
> > with this setup I can tune up to 96KHz on each side of the
frequency
> > the radio is set to.
> >
>
