Hello.

I recently purchased a used Hitachi CDR-1750S CD-ROM drive (old 1x external
SCSI) that was listed as one that would work on the Sun CD-ROM FAQ
(http://saturn.tlug.org/suncdfaq/suncds.htm#hitachi).  I hooked up the
drive (my only external device on my SS2), set the termination dip switch,
set the 512 block size dip switch, and booted the machine.  I get the following
in /var/log/messages:

Nov 29 22:32:05 b60270 kernel:   Vendor: HITACHI   Model: CDR-1750S         Rev: 
0012
Nov 29 22:32:05 b60270 kernel:   Type:   CD-ROM                             ANSI 
SCSI revision: 01 CCS
Nov 29 22:32:05 b60270 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2
, lun 0

So, the cdrom drive was detected.  Now I wanted to mount a cd.  As root I do
mount /dev/sr0 /mnt/cdrom but there is no sr0 device.  I tried /dev/scd0, and
mount will just sit there forever, with no activity on the cd-rom drive's part.
Do I have to make a /dev/sr0 device? What am I doing wrong? (I'm new to
linux on a sparc, and also new to how scsi works).

Thanks!

                -David Carlin
                 [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]

Reply via email to