Hi,
I have added a second ethernet card on SS10 . It is 10/100mbps sbus card.
The SS10 is configure with RedHat5.2 Linux. I have added
append="ether,0,0,eth1" in /etc/silo.conf and rebooted machine.
It does not sense this card. Can any one throw some light on this.
While booting it says
eth1: Cannot locate module
SIOCADDRT: invalid
eth1: Delaying initialization
modprobe also says it cannot locate module while shutting down. Even
though I know it is not a module and I have not configured it that way.
Reuqest your help.
Thanx in Advance.....
Rgds,
Sesh
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
