Hi,
I donot know whether every one knows the solution for this problem or not.
But there was no information available as far as I checked.I looked all FAQs
and at other places. I didnot receive any info from this mailing list also.
But since I could solve the problem my self, I am sending the solution.
As informed I am using kernel 2.0.35(RH 5.2) ( May be bug in this particular
version also , I donot know) on SparcStation10.
I have manually up the sunhme port using ifconfig ( #ifconfig -a sunhme up).
I got this device name from UltraPenguin FAQ. Then I did eth1 up
(#ifconfig -a eth1 up) , now the Happy Meal sbus 100 MBPS card is getting
sensed happily.
Thanx and rgds,
Sesh
~~From [EMAIL PROTECTED] Mon Jan 25 12:00:05 1999
~~Date: Mon, 25 Jan 1999 11:50:18 +0530
~~From: Seshagiri Maddirala Rao <[EMAIL PROTECTED]>
~~To: [EMAIL PROTECTED]
~~Subject: Configuring the second Ethernet Card on Linux
~~X-Sun-Charset: US-ASCII
~~Precedence: bulk
~~X-Loop: [EMAIL PROTECTED]
~~X-Orcpt: rfc822;sparclinux-outgoing
~~
~~Hi,
~~
~~I have added a second ethernet card on SS10 . It is 10/100mbps sbus card.
~~The SS10 is configure with RedHat5.2 Linux. I have added
~~append="ether,0,0,eth1" in /etc/silo.conf and rebooted machine.
~~It does not sense this card. Can any one throw some light on this.
~~
~~While booting it says
~~
~~eth1: Cannot locate module
~~SIOCADDRT: invalid
~~eth1: Delaying initialization
~~
~~modprobe also says it cannot locate module while shutting down. Even
~~though I know it is not a module and I have not configured it that way.
~~Reuqest your help.
~~
~~Thanx in Advance.....
~~Rgds,
~~Sesh
~~-
~~To unsubscribe from this list: send the line "unsubscribe sparclinux" in
~~the body of the message to [EMAIL PROTECTED]
~~
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
