Robson Paiva Gomes wrote:
> Hi Aldrin and all.
>
> Detailing better the error: After install ( I dont change something at
> this step).
>
> Mine system starts... probe scsi,cdrom,ethernet,my disks...
>
> When it arrives in the following part presents the error:
> (ps: mine sun no detect default keymap and font ERROR)
>
> Checking root file system
> execvp:no such file or directory
>
> *** An error ocurred during the file system check
> *** droping you tu a shell;the system will reboot
> *** when you leave the shell...
>
> bla bla.. root password.. or ctrl+d... bla bla!!
>
> it seems that it is an error in the archive system. but I finished to
> partition this disk! because then?
>
> Thanks all!!
>
> Robson
> Rondonopolis,MT, Brazil
> [EMAIL PROTECTED]
>
> >
> > redhat's default is to go runlevel 1 without asking the password... So
> > you could check what is wrong (see /var/log/boot.log if reports
> > something), etc etc... You could even set a new password for root :-)
> >
> > Now, update all packages for redhat6.0. This release has serious bugs
> > because a bug on egcs (which was used to build the relase) ... If you
> > didn't know, there is already redhat6.1 for sparc... I let a sparc4
> > installing this afternoon.
> >
> > > Somebody already passed therefore?
> > No. :-)
> >
> > Aldrin. "Caution! Under no circumstances confuse the mesh with the
> > Area de Ingenieria interleave operator, except under confusing circumstances!"
> > CEC U.Chile The INTERCAL Programming Language Revised Reference Manual
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe sparclinux" in
> the body of the message to [EMAIL PROTECTED]
Hi Robson:
I had a similar problem, and this is how I solve it:
1) sun4m (at last) boots from disk3, in solaris c0t3d0s0
2) linux boots from disk1.
3) you have to change boot-device environment variable
4) get ok prompt: <stop><a>, as you know
4) printenv boot-device says: "boot-device = disk3"
5) setenv boot-device disk1 says: "boot-device=disk1"
I do not remember if I had to reinstall or just reboot, try.
I hope it will be useful.
Carlos Bernal
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
