Hi, when I create a NCM-Task on a CatOS Device like e.g. set ip permit enable snmp set ip permit 192.168.1.1 I am told that the upload task was successful but the command is not beeing written to the device. The "capture configuration" tool works fine. When creating a NCM-Task on an IOS Device like e.g. access-list 99 permit 192.168.1.1 the entry will be added to the existing access-list as I want it to. Are there any known issues that CatOS commands are not being interprted the right way ? I chose the correct Device Family per device ! Robert Robert Skiba Netzwerkmanagement Postbank Systems AG Baunscheidstr. 8 53113 Bonn Tel. :0228-92068267 Fax :0228-92068324 email : [email protected] Postbank Systems AG Baunscheidtstraße 8 53113 Bonn Sitz Bonn Amtsgericht Bonn HRB 8867 Umsatzsteuer-Nr.: DE 813013044 Vorstand: Klaar de Graaf, Vorsitzender,Manfred Löw, Dr.Thomas Mangel, Richard Moormann Aufsichtsrat: Dirk Berensmann, Vorsitzender
Postbank Systems AG Baunscheidtstraße 8 53113 Bonn Sitz Bonn, Amtsgericht Bonn, HRB 8867 Vorstand: Klaar de Graaf, Vorsitzender Manfred Löw, Dr. Thomas Mangel Aufsichtsrat: Dirk Berensmann, Vorsitzender ______________________________ Diese Nachricht ist nur für den vorgesehenen Empfänger bestimmt. Sollten Sie nicht der vorgesehene Empfänger dieser E-Mail und ihres Inhalts sein oder diese E-Mail irrtümlich erhalten haben, bitten wir Sie, den Absender unverzüglich darüber zu informieren und diese Nachricht und all ihre Anhänge vollständig von Ihrem Computer zu löschen. Jede Form der unbefugten Nutzung, Veröffentlichung, des Kopierens oder der Offenlegung des Inhalts dieser E-Mail ist nicht gestattet. Bitte denken Sie über Ihre Verantwortung gegenüber der Umwelt nach, bevor Sie diese E-Mail ausdrucken. This message is intended for the addressee only. If you are not the intended recipient of this e-mail message and its content or have received this e-mail in error, please notify the sender immediately and delete this message and all its attachments. Any form of unauthorized use, publication, copying or disclosure of the content of this e-mail is prohibited. Please consider your environmental responsibility before printing this mail --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
