apologies for the spamming - have solved it - was looking at the wrong mib! Still have the issue of how to feed this information into Report Manager somehow but the onelick part all good
On Wed, Jan 28, 2009 at 1:00 PM, Garry Harst <[email protected]> wrote: > Moving on a bit more - think I have some light at the end of the tunnel > - but with a slight hiccup > > foudn the mib that contains the information I would be after - > Juniper-chassis-defines-mib > > it has the relevant oid for JnxContentsSerialNo .1.7 > JnxContentsDescr .1.6 > JnxContentsRevision .1.8 > JnxContentsPartNo .1.10 > JnxConentsIndex .1.1 > (all part of OID 1.3.6.1.4.1.2636.3.1.8.) > > So I think the next process is to import the mib and map the attributes - > normally I use mibtools to do this but attribute support does not list the > OID when I try this - no option to create attributes > > Assuming I can get this working I was then looking at modifying the > oneclick file > rfc2790-devices-table-config.xml (as a template) and using the newly mapped > attributes > > > <column> > <name>Description</name> > <default-width>200</default-width> > <content> > <attribute>attrid of newly mapped oid</attribute> > </content> > </column> > so two queries here > > 1: is it possbile in a oneclick file to not refer to an attribute ID but to > refer to an OID directly so in the above example the field > <attribute>attrid</attribute> would in fact be > > <attribute>.1.3.6.1.4.1.2636.3.1.8.1.6</attribute> > > 2: trying to understand why the mib rfc2790-devices-table-config.xml won't > import to create attributes correctly > > If anyone has already modified oneclick to give the relevant chassis > information (of peripherals) from Junipers would appreciate any tips you may > be able to pass on too. > > Also does Spectrum 9 have this information already built in - would help > case to get an upgrade done if it does already > > Apologies for the mulitple emails on the same subject > > > > > On Wed, Jan 28, 2009 at 10:16 AM, Garry Harst <[email protected]>wrote: > >> Sorry, realized the question was a bit incomplete >> running Spectrum 8.1 SP2 >> In the Cisco view we get the chassis view and see the assets on the device >> with all relevant information >> >> Question if for the Junipers is there an obvious way of adding in a view >> to see the Cisco Chassis information including assets? >> >> Had a look around and didn;t see anything under Junipers that has the >> equivelent of the Cisco Chassis view >> >> Thanks >> >> On Tue, Jan 27, 2009 at 3:16 PM, Garry Harst <[email protected]>wrote: >> >>> Hi >>> Have an environment with a mix if Junipers and Ciscos >>> I have been asked to run the report from Report Manager >>> "All Chassis Line Card Assets" >>> When I run it I only get the Cisco assets - just wondering if anyone has >>> a smart way to force Report Manager to also include Junipers >>> >>> Thanks >>> >>> - --To unsubscribe from spectrum, send email to [email protected] with >>> the body: unsubscribe spectrum [email protected] >>> >>> >> >> - --To unsubscribe from spectrum, send email to [email protected] with >> the body: unsubscribe spectrum [email protected] >> >> > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
