Rogério- I tried the example you provided, and got the same result. I also tried just adding a new field directly to the PortExportAttributes like this:
<PortExportAttributes export_changed_attribute_only="false">
<intf_name attribute_id="0x1006e" />
...
</ PortExportAttributes>
But that didn¹t work either.
The manual indicates that you can use different values for the
identifer_name and identifier_value in the <Port> tag when importing, but it
doesn¹t indicate how to change these when exporting. I¹m afraid your best
bet at this point is to contact support and find out how to do this.
Sorry,
Jim
On 10/28/10 4:29 AM, "[email protected]" <[email protected]>
wrote:
> Jim,
>
> Thanks! The MGT is very helpful.
>
> The only thing I did not realize was collect the interface¹s name (model
> name). I did some mod on .modelinggatewayresource.xml¹ PortExport (the xml
> snippet follows), but it didn¹t show as expected.
> Is there any thing else I should do?
>
>
> <Attributes
> circuit_id = "0xc4042f"
> circuit_name = "0xc40430"
> community_string = "0x10024"
> agent_port = "0x10023"
> DeviceType = "0x23000e"
> is_managed = "0x1295d"
> log_ratio = "0x10072"
> manager_name = "0x3dc0009"
> model_modify_author = "0x11025"
> model_name = "0x1006e"
> name = "0x1006e"
>
> />
> ...
>
> <PortExportAttributes export_changed_attribute_only="false" >
> <name />
> <ip_address attribute_id="0x12dbb" />
> <ok_to_poll attribute_id="0x11dd8" />
> <Criticality/>
> <NetworkLinkType attribute_id="0x12a79" />
> </PortExportAttributes>
>
>
>
> Best Regards,
>
> Rogério Ferreira da Cunha
> ------------------------------------------------------------------------------
> TIC/ADS-TC/ORS
> Consultor
> Tel: +55-21-3487-6848 Rota: 818-6848
> [email protected]
>
>
>
> "Pfleger, Jim" ---26/10/2010 14:17:06---Hello Rogério- This sounds like a good
> job for the modeling gateway, which is
>
> De: "Pfleger, Jim" <[email protected]>
> Para: "spectrum" <[email protected]>
> Data: 26/10/2010 14:17
> Assunto: Re: [spectrum] List devices, ports and ip addresses
>
>
>
>
> Hello Rogério-
>
> This sounds like a good job for the modeling gateway, which is well-documented
> in the ³Modeling Gateway Toolkit² manual. It will export as much or as little
> information you need to an XML file, based on an XML template. If needed, you
> could then write a small script to translate the exported XML file into some
> other format. We¹ve even used the modeling gateway to export our entire
> topology and reimport it without any data loss (to fix some corrupted
> connections).
>
> HTH,
> Jim
>
>
>
> On 10/26/10 8:56 AM, "[email protected] <[email protected]> "
> <[email protected] <[email protected]> > wrote:
>>> Hi All,
>>>
>>> Is there an efficient way to list all devices, ports and its IP addresses to
>>> automatically export those information to a third party asset system by a
>>> script (I mean using something like the CLI, not oneclick itself)?
>>>
>>> The only way I figured out is, on CLI, show the devices and interfaces and
>>> after all interact over each one to retrieve the ip_address attribute (show
>>> attributes). This process has been too slow!
>>>
>>> Sincerely,
>>>
>>>
>>>
>>> Rogério Ferreira da Cunha
>>> ----------------------------------------------------------------------------
>>> --
>>> TIC/ADS-TC/ORS
>>> Consultor
>>> Tel: +55-21-3487-6848 Rota: 818-6848
>>> [email protected] <[email protected]>
>>>
>>>
>>> "O emitente desta mensagem é responsável por seu conteúdo e endereçamento.
>>> Cabe ao destinatário cuidar quanto ao tratamento adequado. Sem a devida
>>> autorização, a divulgação, a reprodução, a distribuição ou qualquer outra
>>> ação em desconformidade com as normas internas do Sistema Petrobras são
>>> proibidas e passíveis de sanção disciplinar, cível e criminal."
>>>
>>> "The sender of this message is responsible for its content and addressing.
>>> The receiver shall take proper care of it. Without due authorization, the
>>> publication, reproduction, distribution or the performance of any other
>>> action not conforming to Petrobras System internal policies and procedures
>>> is forbidden and liable to disciplinary, civil or criminal sanctions."
>>>
>>> "El emisor de este mensaje es responsable por su contenido y
>>> direccionamiento. Cabe al destinatario darle el tratamiento adecuado. Sin la
>>> debida autorización, su divulgación, reproducción, distribución o cualquier
>>> otra acción no conforme a las normas internas del Sistema Petrobras están
>>> prohibidas y serán pasibles de sanción disciplinaria, civil y penal."
>>>> * --To unsubscribe from spectrum, send email to [email protected]
>>>> <[email protected]> with the body: unsubscribe spectrum
>>>> [email protected] <[email protected]>
> * --To unsubscribe from spectrum, send email to [email protected]
> <mailto:[email protected]> with the body: unsubscribe spectrum
> [email protected]
"O emitente desta mensagem é responsável por seu conteúdo e endereçamento.
Cabe ao destinatário cuidar quanto ao tratamento adequado. Sem a devida
autorização, a divulgação, a reprodução, a distribuição ou qualquer outra
ação em desconformidade com as normas internas do Sistema Petrobras são
proibidas e passíveis de sanção disciplinar, cível e criminal."
"The sender of this message is responsible for its content and addressing.
The receiver shall take proper care of it. Without due authorization, the
publication, reproduction, distribution or the performance of any other
action not conforming to Petrobras System internal policies and procedures
is forbidden and liable to disciplinary, civil or criminal sanctions."
"El emisor de este mensaje es responsable por su contenido y
direccionamiento. Cabe al destinatario darle el tratamiento adecuado. Sin la
debida autorización, su divulgación, reproducción, distribución o cualquier
otra acción no conforme a las normas internas del Sistema Petrobras están
prohibidas y serán pasibles de sanción disciplinaria, civil y penal."
* --To unsubscribe from spectrum, send email to [email protected] with the
body: unsubscribe spectrum [email protected]
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]<<image.gif>>
