Thanks about that attributte, i dont see it before. Now i must find the way to get that value and pass it thougt an web-browser action.
Diego
On 07/19/2011 05:32 PM, Pfleger, Jim wrote:
Diego-
The "Distributed SpectroServer Admin" guide talks a little about this
at the end of the "Fault Tolerance" chapter. It refers to the "PausePolling"
attribute on the VNM. If this attribute becomes false on the secondary, it
indicates that the secondary has made itself active.
You could also try working with the output of HostUpdate or MapUpdate.
I haven't tested to see if they'll give any indication of which server is
acting as primary.
Finally, if you want to look at the CORBA API, you can query the MLS
directly. Contact me off-list if you'd like to talk more about that option.
HTH,
Jim
On 7/19/11 1:20 PM, "Diego Pereyra" <[email protected]>
wrote:
Hi list!
Im doing some works with scripts... and i need to get the
information of how Oneclick know wich spectrum server is active in a Fault
Tolerance mode... i cannot find some attribute that inform me that, not even
the precedences... The only i get is an alarm then the swich is maded (the
yellow state)
Thanks for All !!!
* --To unsubscribe from spectrum, send email to [email protected]
with the body: unsubscribe spectrum [email protected]
--
<http://www.netsol-international.com/>
Pereyra Diego
System Engineer
Esmeralda 684, Piso 10(C1007ABF)
Ciudad de Buenos Aires
Argentina
Web:
E-mail:
Voice:
http://www.netsol-international.com <http://netsol-international.com/>
[email protected] <mailto:[email protected]>
+54 11 5031 1162
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]<<ATT01073.jpg>>
<<ATT01075.jpg>>
