For discarding, simply set the event severity to "None" after mapping the trap ID to a Spectrum event. For HA/DR, point your routers to your MLS and BLS (main location server and backup location server) and the traps will be routed to the appropriate landscape. VARBINDs will be preserved, and the trap volume and trap types you specify are all well within spec. If you need trap forwarding, look at Trap Exploder (from EHealth) or Trap Receiver (http://www.trapreceiver.com/ -- Windows only).
Sorry if this is vague; I haven't touched in a year Spectrum. -DTK -- david t. klein Cisco Certified Network Associate (CSCO11281885) Linux Professional Institute Certification (LPI000165615) Redhat Certified Engineer (805009745938860) Quis custodiet ipsos custodes? From: Bohra, Saurabh [mailto:[email protected]] Sent: Tuesday, October 09, 2012 5:00 PM To: spectrum Subject: [spectrum] SNMP trap filtering application All, I am looking for an application which can do trap filtering for us. Any recommendations will be helpful. I am looking for following functionalities. 1. Should be able to process SNMP v1 and v2c traps. 2. Process up to 100 traps/second. 3. Discard a trap based on Enterprise OID, generic and specific trap type combination. 4. Discard a trap based on the value of variable binding. 5. For all other trap, preserving the source IP address and the entire trap variable bindings, should be able to forward it to at least 5 destinations. 6. The application should be able to support HA/DR. Thanks, Saurabh Bohra Sr. Network Mgmt Systems Analyst ESPN Inc. O: 860-766-0842 | M: 860-385-3597 | e-mail: [email protected] * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2221 / Virus Database: 2441/5325 - Release Date: 10/11/12 --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
