Hi, You can write your own script based on the ones that CA provides with the defaults for SSH and TELNET. You can copy those and use it.
As for the Enable password, you can set an attribute on the device, if I remember correctly it should be 'NCM_Enable_Pw_Disabled (0x12e68)' so that the use of enable password is not enforced. I think there is also an attribute at device family level that is doing the same thing. I don't remember exactly if it's the same attribute. If you filter the attributes by 'enable' you'll see exactly what I'm talking about. You should create your own device family and set the attributes for communication with the device accordingly. I use the sysObjectID attribute for identifying the correct devices to be members of the device family. HTH, Cătălin Fărcăşanu SOLVIT NETWORKS www.solvitnetworks.com -----Original Message----- From: kavi arasu [mailto:[email protected]] Sent: Tuesday, June 17, 2014 6:16 PM To: spectrum Subject: [spectrum] NCM Config - Script Hi, I need to backup the config of devices not supported by CA. Please let me know how to fetch the configuration of the devices, which doesn't have enable password. Does anyone have scripts for my need or any suggestions. Thanks, Kavi --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
