Hello All, I wonder if anyone has any idea/hint for this issue. I want spectrum generates an alarm while the output of the application 'vport_used.pl' violates a defined value. This application is running on the device and its output is viewable from Spectrum "Component Details > Information > System Resources >System> External Application Monitors (UCD-SNMP)". I can also fetch that output value from the device with running snmpwalk for OID '.1.3.6.1.4.1.2021.8.1.101.3'. I tried to set a watch but i found no attribute to set in my watch.
I will appreciate if you inform me about your comment/idea in this case. Thank you. Regards, Ferey On Thu, Jul 9, 2015 at 5:40 PM, Christian Schneider < [email protected]> wrote: > Just create a Watch, very easy. > > Regards > > Christian Schneider > Enterprise Service Specialist > > 4-tune GmbH > Sägereistrasse 33 > CH-8152 Glattbrugg > > Tel +41 71 930 07 00 > Fax +41 71 930 07 01 > Mob +41 79 418 45 42 > Mail [email protected] > > Am 09.07.2015 um 22:22 schrieb Fereydoon Mallahi Karai <[email protected] > >: > > Hello, > > I have added a device in Spectrum and want Spectrum to generate an alarm > while the contents of an application which is on the device and i can see > that application in "Component Details > Information > System Resources > >System> External Application Monitors (UCD-SNMP)" exceeds the defined > threshold. I want to know if i can define thresholds and generate alarms > based on the output of that application in Spectrum. > > Please inform me if you have any idea. > > Thank you. > > Regards, > > Ferey > > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
